More Mobile Software

Good Day.

I recently did a few multi-level dives, meaning I was at multiple depths for multiple durations, 125ft for 5min, 60ft 10min 30ft for 10min, total 26min in the water, how can I record that in the Dive Log App? Any suggestions?

Hi,

Typically this information would be captured by your dive computer and when you download your dive computer it would be displayed in the "profile" captured from your dive computer (a detailed graph of your dive showing details at discrete points in your dive). However, if you are manually entering your dives you will need to record this information in a different way.

There are two options you can consider. The first is the "notes" section associated with the "Dive Metrics". If you tap the section where you enter your depth and time (and tap "Edit) you can enter a "Note" where you could enter "125ft, 5min, 60ft,10min 30ft, 10min" and then you would enter 26 minutes in the dive time field and your max depth (125ft) in the depth field. The multi-level details would then be displayed on the right hand side of under the "profile" drawing on the main dive page. Note that if you are diving with a multi-level dive planner like the one PADI offers (wheel or the electronic dive planner) you can also enter your start and ending pressure groups on the Dive Metrics page and these will be displayed above the profile graphic at the start and the end of the dive (either side of the max depth).

The other option is to enter the details of your profile in the dive Comments section. This provides more space for a more detailed accounting of your multi-level profile.

I hope that helps.

Cheers,

Greg